Nitric Oxide Patient Monitoring Trolley

Key features

• The body features a snap-lock lid that opens and closes from one side. This allows for easy installation of equipment inside the body, and when intervention is needed, the equipment can be accessed without requiring any tools.
• The body is mounted on a foot made from 8mm thick DKP material, with bolt connections.
• The foot includes five Ø50mm wheels; two are lockable, and three are non-lockable.
• The empty weight of the trolley is 16kg.
• The foot is positioned low to the ground to prevent equipment from being damaged or falling off the trolley during vibrations.
• There is a compartment in the foot for placing the gas cylinder, and a strap is used to secure the cylinder in place. The strap has an adjustable locking system.
• High-pressure gas from the cylinder is transferred via a steel hose to a regulator placed inside the body. The gas pressure is reduced and passes through a flowmeter, then is released from the top of the body through a jack. The gas flow inside the body is managed with plastic hoses.
• Two manometers are placed inside the body to monitor the high-pressure input and low-pressure output gas values.
• The body features three stainless steel accessory rails made from 304-grade stainless steel, placed in the channels. Two are on the right and left of the body, and one is at the front. The positions of these rails can be adjusted as needed.
• The body also includes an anodized aluminum sliding rail for the monitor. The monitor is placed on the rail, and it can be locked in at least three positions using a spring lock.
• On the front surface of the regulator inside the body, there is an adjustment valve that allows for output pressure settings between 1 and 10 bars.